A couple weeks ago Matt Ransford sent me the image that inspired this post about the connection between transport bikes and colonial rulers. Accompanying the image above Matt writes:

“I’ve got another one for you, this time from Shanghai. It’s not as impressive in the photo as it was in person, but this U-lock had to have been at least 1-inch thick rebar. The removeable bar is hooked at one end and locked in the can at the other. The lock itself is a simple padlock, but it’s at the far end of that can so that you can’t get any leverage if you try to get in there with bolt cutters. Pretty impressively brute DIY solution.

Matt”

I’ll add that it’s all the more impressive because such a lock can be made (and probably was made) entirely from scrap parts (the fire extinguisher can being the best part). That’s good design, as opposed to most of the pointless bike crap invented by professional designers.

Just a couple days later Erwin van Doorne, also in Shanghai, sent me the above picture of his bike having a flat repaired. Translation of his Dutch explanation:

” Occasionally I get a flat tire (there is sometimes a lot of glass and metal on the road here) but for a couple kwai they patch your tire.

zài jiàn,
Erwin”

The bike is a Workcycles Transport 2-Tube and it’s outfitted as Dutch as can be, right down to the Bobike child seat and Dutch milk crate on the front carrier. The frame is 70cm huge so it’s a fair guess that Erwin would have trouble finding a bike to fit his 200cm or so frame in China.

Note that the bike mechanics are patching the tube with the wheel in place, just like we do in the Netherlands… but most of the western world seems to be unaware of. I particularly like their little, portable workbench to keep the tube and glue clean during the patching process.

Thanks Matt and Erwin!

This is a slightly updated repost: Winter is upon us somewhat early this year and this is highly relevant info for anybody who cycles through the winter, especially if your bike is stored outdoors.

By far the most common problem that the cyclist encounters with winter cycling is the brake or gear cables freezing. This is generally the result of water condensing or dripping into the cable housing and then freezing, effectively bonding the inner cable to the housing. It only takes a tiny bit of water to do this but we fortunately have a solution. Read below for an explanation.
………………………………………………………………………………

We arrived at work yesterday figuring that the sub-zero cold, wind and snow would keep most of the customers away, leaving us with time to work on some projects. The highest priority is reconfiguring our workshop after building a massive, floor-anchored, steel frame to hang our electric bike lifts from. It’s a great improvement but not entirely our own initiative. The lifts, you see, were bolted into the 150 or 200 year old wooden beams of our ceiling… and thus the floor of the neighbors upstairs. Though the lifts are nearly new and operate very quietly they do make some vibration. Standing on the concrete (over sand) floor we never noticed this vibration but it drove the lady upstairs crazy. Actually she’s complained very vocally and angrily about a lot of things, apparently calling and writing every possible authority on a regular basis. Most of her complaints have nothing to do with our activities (there’s another bike workshop next door and several apartments have been renovated), but the vibration was a legitimate issue according to the various city inspectors who visited to investigate.

So the city ordered the building owner (a social housing corporation that manages tens of thousands of properties) to fix the vibration problem. It was decided that the only solution was to totally isolate the lifts from the floor beams, and the only practical way to do that was to build a steel frame all the way to the floor. We’re very fortunate and thankful that they took care of the job and paid for it. But it still requires an investment of several days of our labor to refit the lifts and lights. We took the opportunity to make them fully adjustable on both X and Y axis as well as angle, and now we’re adding more lights. I don’t think a workshop can ever have enough light.

Comments one year later: Apparently the frame has solved the vibration problem since we haven’t heard a peep from our upstairs neighbor. Meanwhile the mechanics are very happy to have been able to adjust the lifts to exactly the location and angle where they can most efficiently and comfortably work.

For those of you who build and repair (heavy) city and transport bikes: Such lifts are absolutely the only way to work. These bikes are much too heavy and unwieldy to manually heft into the workstands used in most bike shops outside the Netherlands. Those are intended for lighter, recreational bikes. The lifts are also highly flexible; You can lift only the front or rear, or perhaps one side of a big three wheeler. When working on something other than bikes you can simply raise the hooks above head height and then you’ve lots of free floor space – often really handy in a shop that builds and repairs wooden boxes.

Anyhow, this is all we were thinking about yesterday morning so I got busy with the scaffold, drills, plugs, screws and wiring to hang the fluorescent boxes on our ancient ceiling. And then the first snowy Cargobike and customer came in:

Customer: “My bike is almost impossible to ride. It’s really slow, and I think the brake lever might be broken.”

Mechanic: “I’m pretty sure your cables are frozen.”

Customer: “But I think there’s also something wrong with the brake.”

Mechanic: “The brakes are probably fine but they’re being locked by the frozen cables.”

Customer: “Oh wait, now it seems to be fine.”

Mechanic: “Sure, your bike is indoors so the cable just thawed, releasing the brake. It’ll freeze again a few moments after going outside. If you can wait 15 minutes I’ll fix it.

While working on this bike another snowy bike came in with the same problem, and so it went the whole day. Alexis and I pulled and flushed the cables of at least 15 bikes yesterday. The problem is that Amsterdam bikes live outdoors, rain or shine. Tiny amounts of water drip and condense into the cable housings. On good quality bikes the cables are stainless steel and the housings are lined with polyethelene or another low friction plastic so the water doesn’t make much difference… until the thermometer goes below the freezing point. Then the cable freezes inside the housing. Usually it creates enough friction that pulling hard on the brake lever will overcome the friction, actuating the brake but the brake’s return spring cannot pull it back… thus locked brakes.

So here’s what you do to fix (or prevent) a frozen cable:

1. Let it thaw.

2. Remove the crimped end cap and make sure the end of the cable isn’t unwound or damaged. If it is either rewind, shorten or replace the cable as necessary.

3. Remove any kinks in the cable so that it can easily be pulled and reinserted through the housing.

4. Pull the cable out.

5. Seal the nozzle of a compressed air pistol against the upper end of the housing and blow everything possible out of the housing.

6. Seal the dispenser straw of a suitable light oil against the brake lever end of the housing. It might be necessary to pull the housing cap to do this. We use a generic multipurpose oil with teflon but just about any light oil should work fine. Don’t use “dry” type lubricant because it won’t displace the water for long.

7. Spray the oil into the housing until it begins coming out the other end.

5.5 Oops. Put a rag at the brake end of the housing to catch the oil coming out at great velocity.

8-9-10. Thread the cable back into the housing, readjust the brake and crimp a new end on.

This fix is valid for any brake (or gear) cable but I’m basically assuming the bike has roller brakes here. Drum brakes can pull their own freezing tricks and rim brakes simply aren’t suitable for storing outdoors and riding in snow country. Now the techies can ask me why I didn’t write anything about disk brakes.

This experience also demonstrates something about Amsterdam cyclists: Not only do they store their bikes on the street, they also ride in ALL conditions including snow. Of course they do; How else would they get to work, take the kids to school, do the groceries and visit their friends?

Speaking of snow, here’s a sneak peek at our surprising new development: The WorkCycles Child Transport Sled. We’re strong proponents of the K.I.S.S. philosophy (Keep It Simple Stupid) and our Sled meets the K.I.S.S. criteria beautifully: It needs no wheels, tires, bearings, towing linkage or even harnesses. Just shove the kid in and go! It’s versatile too: You can pull it while walking, tie the patented “S.T.R.A.P.” (Singular Tied/Releasable Attaching Piece-of-plastic-webbing) to your bike or even have your dog(s) or oxen pull it from a yoke. When there’s no snow it can be attached to the front carrier of your bike as a convenient transport bin.

In testing the WorkCycles sled we also learned that Amsterdammers not only ride their bikes all year round in all conditions, they can also make really big snowballs.

The Sinterklaas “Intocht” (arrival parade) needs no introduction for the locals who began chasing Sinterklaas and his many “Zwarte Pieten”along the Amstel river and through the streets of Amsterdam as toddlers. It goes approximately as follows:

Sinterklaas is the Dutch equivalent of Santa Claus. While they’re both apparently Saint Nicholas only Sint’s white beard bears any resemblance to the fat “Ho Ho Ho!” fellow in the red snowsuit who flies his reindeer driven sleigh from the North Pole. Sinterklaas is tall, skinny, serious and righteous. He comes not from the north, but by ship from Spain. Sint himself is not actually Spanish; he’s Turkish. I suppose it’s all really a lot less weird than flying a reindeer powered sleigh from the North Pole.


Sinterklaas on his white horse


Santa Claus in his reindeer-powered flying sleigh

While Santa Claus has some elves to help him out Sint has an entire army of Zwarte Pieten (Black Petes). The Pieten do the heavy lifting as well as the “naughty or nice” judging of the children. Naughty children get their gifts replaced by coal and truly heinous kids are stuffed into a sack and brought back to Spain. I’ve never been clear on just what despicable crimes a child must commit to be sentenced to a holiday in Spain but I assume it must be worse than struggling to avoid having their teeth brushed or head-butting their baby sister.

Pascal didn’t get stuffed into a sack and brought to Spain but he did get a bunch of pepernoten dumped on his head by a mischievous Piet.

Depending on who’s telling the story in what era Zwarte Piet has variously been depicted as a shackled devil, a chimney sweep, a Moor colorfully dressed as a renaissance era page, or a Moor colorfully dressed as a renaissance era page whose face is blacked from descending many chimneys. The first explanation has been abandoned since it doesn’t sound nice to modern children and the rest each have their modern adherents. In the modern tradition Zwarte Piet, or rather an entire battalion of Zwarte Pieten, have been played by men and women in blackface which provokes a surprisingly little bit of controversy for it’s being potentially racist (depending on which version of the story you want to believe).

Only confusing an already convoluted story: A Moorish Piet probably wouldn’t even be black since what the Europeans referred to as “Moors” were mostly Berbers and Arabs from northern Africa. As a resident of a city with a considerable population with roots in this region I can assure you that they’re usually not particularly dark skinned. But heck, Shakespeare also portrayed Othello as black in so who am I to argue? Not that any of this is terribly relevant aside from showing how confused traditions can get.

Racist or controversial or not this is an enormously popular celebration, as witnessed by some half million happy fans lining the streets of Amsterdam in the rain (remember: We’re not made of sugar.) cheering the arrival of Sinterklaas and 670 Zwarte Pieten. Interestingly I spotted what seemed to be a handful of black Zwarte Pieten, also in blackface of course.

Each year Sint and the Pieten load up a ship full of “pepernoten” (little cookies like ginger snaps) and stuff in Spain and sail for Holland. Their exact route is unclear but they do end up sailing up the Amstel, which is odd considering that this is inland from Amsterdam. Perhaps they’ve chosen another inland route to pick up carrots for the horses or something.

Zwarte Piet with a nice big carrot for the horses.

Once they reach the Amstel thousands of families with kids on bikes and in bakfietsen ride along the banks cheering Sint and the Pieten onward. The ship lands by the Scheepvaartsmuseum (the shipping museum) in the center of Amsterdam and Zwarte Pieten and Sint parade through the streets in all manner of Dutch vehicles and conveyances.

Inline skate Piet with balance bike Pascal.

Sinterklaas rides his white horse while the various Pieten show their preferences for Workcycles transport bikes, but also inline skates, unicycles, fire engines and in an unfortunate development this year: scooters. Yuck, we don’t like scooters, but we’ll discuss the problem of scooters on the bike paths another day.

Degenerate Pieten on scooters

Meanwhile we’re doing our best to keep our own kids from going down the gateway drug, slippery slope of scooterdom, beginning of course by cycling daily with them from about a month old.

A couple young bakfiets passengers

It could eventually backfire but thus far it seems to be working; Pascal is absolutely crazy about his teeny bike, insisting on riding it everywhere we go. He calls it his “Beanits bicycle” (BMX bicycle). Not only are we getting a kick out of watching him ride we’re also not complaining about no longer having to carry him around, nor about him coming home exhausted from a day of “cycling” all over the city, ready for a nap.

At such a young age (two) kids learn such motor skills amazingly quickly. After just a couple weeks on the bike Pascal figured out he could push off and ride with his feet in the air. Two weeks later he’s maneuvering along busy sidewalks, up and down Amsterdam’s cobblestoned bridges and “jumping” off steps and curbs. Obviously we don’t let him get too far since a two year old’s judgement must be pretty close to nil but he’s been very well behaved so far… which partially explains why he didn’t get shipped to Spain last week.

His first Halloween costume? The great Eddy Merckx of course!

The latest issue of the Vogelvrije Fietser, the magazine of the Dutch cyclists’ union features workbikes, which basically means it features WorkCycles. Those are WorkCycles Fr8′s in use by customer Eurotank on the cover as well as in the two page spread that begins the article.

To translate the first part of the article:

“Everything you dare transport”

Somewhere in Azerbijan on the terrain of a cement factory ride bikes from WorkCycles, a bike builder from Amsterdam. Also in Latvia, Nigeria, Serbia and Finland they do their duties in factory halls.

Where the tough transport bikes land and at which companies, Henry Cutler of Workcycles often doesn’t know. “Purchasing organizations order the bikes from us. Sometimes that organization belongs to a concern and sometimes they’re hired in to purchase stuff.” In any case businesses that need tough bikes know where to find him. Cutler is from the US and nourishes the Dutch bicycle culture and history. So has he put the wind back in the sails of the old fashioned, indestructible bakfiets in Amsterdam. “I’m an American who maintains a Dutch tradition. For the Dutch is the bicycle apparently not so interesting. The bicycle is something to use, such as a pair of shoes or a refrigerator.”

For €3250 you can buy a brand new bakfiets from WorkCycles, based on a model that determined the street scene in the 1930′s, with stainless steel components, fat tires, and thick spokes. “On the bakfietsen sit 120 kilo guys who throw 400kg in the box. It really has to be strong.” The interest in all sorts of transport bikes for businesses has grown quickly in recent years, says Cutler. But why so suddenly? “The bicycle wasn’t hip, but now it is. I see that that improved status of bikes has made its way onto the work floor. What’s also handy is that you don’t need a driver’s license for a transport bike. And you can’t do much damage with a bicycle. But if you hit something with a big forklift something’s going to get broken.”

Naturally it’s also just fun to ride over the extended industrial terrain on a WorkCycles Fr8 Transport bike. About the maximum load capacity of the bikes you needn’t worry, assures Cutler. “Everything you dare transport on the bike, the Fr8 Transport bike can handle.”

Vogelvrije Fietser

It’s ironic that some humble, dirty parts such as a parking stand actually have far more influence on your cycling experience than a beautiful frame or fancy, name-brand components. A stable, smooth working parking stand enables you (for example) to safely load up the kids and groceries, plop the bike onto the ground and cycle away uneventfully… just how you want it to be. But few people pay attention to such mundane things in the showroom so this is exactly where most manufacturers save a few bucks or euros. WorkCycles isn’t “most manufacturers” because we actually ride our bikes every day, carry our kids on/in them, move our stock between two shops on them… and listen to our customers who do the same.

Finding decent parking stands has been one of our most vexing challenges. During our quest for the perfect parking stand we’ve tried dozens. Most are so crappy that they don’t even deserve mention: All those Hebie copies from Taiwan and China fit poorly and then either bend under the weight of a loaded bike, quickly get scarily sloppy and break, or seize up from corrosion. The more sophisticated folding stands from Humpert and Spanninga (Sparta) have also failed our durability tests miserably. The cast aluminium Pletschers are light and pretty but not strong enough for bikes with child seats and heavy bags.

The older, galvanized version of the Hebie 2-leg centerstand

Once upon a time we complained bitterly to Hebie about their stands quickly seizing up and breaking at the riveted joints but they’ve listened and since fixed these problems. The joints have been reinforced and the stands are now powder-coated black instead of galvanized (silver) so they can live outdoors in salt-water-air environments. The Hebies stands are good but they still have limitations: They’re a single-pivot design so they can only be made so wide before interfering with cranks and possibly your heels. Wide equals stable.

For the Fr8 we have a specially bent, wider Hebie stand. It’s 33cm instead of the normal 26cm. That makes it more stable and I haven’t heard of any customers complaining that they hit their heels on the stand (though it probably does happen sometimes). On the downside our special Hebies are more expensive.

Of course the integrated stand of the Fr8′s Massive Rack doesn’t suffer any of these limitations because it’s at the front of the bike. The Massive Rack is 60cm wide, making it by far the widest and most stable stand available. But this huge carrier is just too much for most non-industrial users to ride around with. So the centerstand search has continued.

WorkCycles is also the Benelux importer for Monark transport bikes and a while back we received a couple new double-pivot stands they’ve made for their postal delivery bikes. This stand makes no compromises to be suitable for the “consumer market”; It’s pure, heavy, industrial steel. It’s not pretty nor is it designed to it anything other than Monark’s own matching frames. Thus today I put the grinder and drill to one and modified it to fit the WorkCycles Gr8 prototype I’ve been riding recently. I suppose it’d be more suitable on the heavier-duty Fr8 but this is the bike I’m riding right now and I still have more components to test before moving on to another bike.

Fitting the Monark centerstand to the Gr8/Fr8 was a laborious task, also requiring cutting away a section of the chaincase. Fortunately it’s at the bottom of the case and now fairly well protected by the stand itself so it shouldn’t compromise the weatherproofness much. Removing the chaincase for service is really tight now, though.

So how wide and stable is the Monark stand? It’s 45cm, thus nearly twice as wide as the normal Hebie 2-leg stands. The bike stands as stably as a house on it. Given it’s massive construction I’ve absolutely no doubts about it’s strength but now we’ll see how it endures the test of time and weather.

Below we see that the Monark stand is by far the widest one that fits underneath a (reasonably) normal bike:
Hebie normal 26cm
Hebie modified for Fr8 33cm
Monark double-pivot 45cm
Bakfiets.nl Stabilo (Cargobike) 54cm
WorkCycles Massive Rack 60cm

PS: Surely somebody will have to ask what the Monark stand weighs. Answer: I don’t know but it’s really heavy, about twice the weight of the Fr8 Hebie stand it replaced.

PS2: Perhaps you want to know why my bike is so rusty. Aren’t WorkCycles bikes supposed to be high-quality and corrosion resistant for their intended outdoor life? Yes they are but I’m deliberately riding and leaving an unpainted frame outdoors to see how badly it will rust. In fact it’s not nearly as bad as we figured it’d be; After about four months of Dutch autumn and winter rain, snow and road salt it’s mostly brownish on the surface. So far there’s nothing that couldn’t quickly be sanded away, nor does it get trousers dirty or anything.

We arrived at work yesterday figuring that the sub-zero cold, wind and snow would keep most of the customers away, leaving us with time to work on some projects. The highest priority is reconfiguring our workshop after building a massive, floor-anchored, steel frame to hang our electric bike lifts from. It’s a great improvement but not entirely our own initiative. The lifts, you see, were bolted into the 150 or 200 year old wooden beams of our ceiling… and thus the floor of the neighbors upstairs. Though the lifts are nearly new and operate very quietly they do make some vibration. Standing on the concrete (over sand) floor we never noticed this vibration but it drove the lady upstairs crazy. Actually she’s complained very vocally and angrily about a lot of things, apparently calling and writing every possible authority on a regular basis. Most of her complaints have nothing to do with our activities (there’s another bike workshop next door and several apartments have been renovated), but the vibration was a legitimate issue according to the various city inspectors who visited to investigate.

So the city ordered the building owner (a social housing corporation that manages tens of thousands of properties) to fix the vibration problem. It was decided that the only solution was to totally isolate the lifts from the floor beams, and the only practical way to do that was to build a steel frame all the way to the floor. We’re very fortunate and thankful that they took care of the job and paid for it. But it still requires an investment of several days of our labor to refit the lifts and lights. We took the opportunity to make them fully adjustable on both X and Y axis as well as angle, and now we’re adding more lights. I don’t think a workshop can ever have enough light.

Anyhow, this is all we were thinking about yesterday morning so I got busy with the scaffold, drills, plugs, screws and wiring to hang the fluorescent boxes on our ancient ceiling. And then the first snowy Cargobike and customer came in:

Customer: “My bike is almost impossible to ride. It’s really slow, and I think the brake lever might be broken.”

Mechanic: “I’m pretty sure your cables are frozen.”

Customer: “But I think there’s also something wrong with the brake.”

Mechanic: “The brakes are probably fine but they’re being locked by the frozen cables.”

Customer: “Oh wait, now it seems to be fine.”

Mechanic: “Sure, your bike is indoors so the cable just thawed, releasing the brake. It’ll freeze again a few moments after going outside. If you can wait 15 minutes I’ll fix it.

While working on this bike another snowy bike came in with the same problem, and so it went the whole day. Alexis and I pulled and flushed at least 15 cables yesterday. The problem is that Amsterdam bikes live outdoors, rain or shine. Tiny amounts of water drip and condense into the cable housings. On good quality bikes the cables are stainless steel and the housings are lined with polyethelene or another low friction plastic so the water doesn’t make much difference… until the thermometer goes below the freezing point. Then the cable freezes inside the housing. Usually it creates enough friction that pulling hard on the brake lever will overcome the friction, actuating the brake but the brake’s return spring cannot pull it back… thus locked brakes.

So here’s what you do to fix (or prevent) a frozen cable:

1. Let it thaw.

2. Remove the crimped end cap and make sure the end of the cable isn’t unwound or damaged. If it is either rewind, shorten or replace the cable as necessary.

3. Remove any kinks in the cable so that it can easily be pulled and reinserted through the housing.

4. Pull the cable out.

5. Seal the nozzle of a compressed air pistol against the upper end of the housing and blow everything possible out of the housing.

6. Seal the dispenser straw of a suitable light oil against the brake lever end of the housing. It might be necessary to pull the housing cap to do this. We use a generic multipurpose oil with teflon but just about any light oil should work fine. Don’t use “dry” type lubricant because it won’t displace the water for long.

7. Spray the oil into the housing until it begins coming out the other end.

5.5 Oops. Put a rag at the brake end of the housing to catch the oil coming out at great velocity.

8-9-10. Thread the cable back into the housing, readjust the brake and crimp a new end on.

This fix is valid for any brake (or gear) cable but I’m basically assuming the bike has roller brakes here. Drum brakes can pull their own freezing tricks and rim brakes simply aren’t suitable for storing outdoors and riding in snow country. Now the techies can ask me why I didn’t write anything about disk brakes.

This experience also demonstrates something about Amsterdam cyclists: Not only do they store their bikes on the street, they also ride in ALL conditions including snow. Of course they do; How else would they get to work, take the kids to school, do the groceries and visit their friends?

Speaking of snow, here’s a sneak peek at our surprising new development: The WorkCycles Child Transport Sled. We’re strong proponents of the K.I.S.S. philosophy (Keep It Simple Stupid) and our Sled meets the KISS criteria beautifully: It needs no wheels, tires, bearings, towing linkage or even harnesses. Just shove the kid in and go! It’s versatile too: You can pull it while walking, tie the patented “S.T.R.A.P.” (Singular Tied/Releasable Attaching Pieceofplasticwebbing) to your bike or even have your dog(s) or oxen pull it from a yoke. When there’s no snow it can be attached to the front carrier of your bike as a convenient transport bin.

In testing the WorkCycles sled we also learned that Amsterdammers not only ride their bikes all year round in all conditions, they can also make really big snowballs.

A customer just passed a link to this video along: Riding his WorkCycles Fr8 with his two daughters in GMG seats on the rear carrier, and son on the saddle behind the handlebar… plus a big milk crate on the front carrier. Everybody looks pretty happy with the situation. So sweet, thanks very much Ben!

The question whether cycling is decreasing in popularity in Amsterdam or the Netherlands has been raised here several times. Each time the answer has been “No, transportation cycling is actually increasing here.” Today yet more statistics were listed in the Bike Europe trade website that show that bike use continues to rise.

from Bike Europe (via Fietsberaad though I couldn’t find it there) with my commentary mixed in:

AMSTERDAM, The Netherlands – The bicycle is the means of transport used most often in Amsterdam. Between 2005 and 2007 people in the city used their bikes on average 0.87 times a day, compared to 0.84 for their cars. This is the first time that bicycle use exceeds car use.

There are not many places in the world where bicycle use actually exceeds car use, and certainly no other capital cities. But it gets better…

In 2006 the inhabitants of Amsterdam engaged in some 2 million trips a day, an 8% reduction compared to 1990. This is due to the number of trips per person per day falling from 3.6 to 3.1. The number of transfers has fallen in the old city within the ring road in particular.

These seem to be the total numbers of trips, made by all means of transportation.

The number of trips by car, compared to 1990, has fallen in all districts (-14%), whereas the number of trips by bicycle has only risen within the ring road (+36%). The bike is used most often in the town centre (41% versus an average of 28%) and the car least often (10% versus an average of 28%). This can be attributed to the restrictive parking policies enacted here since the 1990s.

Not surprisingly the higher the density, the more bike use is favored. Thus where we live and the WorkCycles shops are the number of bicycle trips is at least four times as great as car trips.

‘Dienst Infrastructuur en Beheer’, the infrastructure department of the city registered approximately 235,000 car movements in both directions at the city centre in 1990; by 2006 this had fallen to 172,000, a decrease of over a quarter. Over the same period the number of daily movements by bicycle rose from 86,000 to over 140,000 (+60%).

Let’s keep up the good work so that in a generation cars will be an insignificant part of the traffic and street scene in Amsterdam.

I’m surprised this little Smart car doesn’t tip over backwards when driving with this huge (70cm frame) WorkCycles Transport Double-Tube. But apparently a man of 200cm (6′ 6″) fits in a Smart.

Photo by Doede van der Linden.

Just browsing through the old photos here, and I came across some nice oldies: January 2004, WorkCycles‘ first shop in the Veemarkt in Amsterdam under construction. We’d cleaned it up from it’s former (extremely dirty) life as a truck garage and installed the platform that’s still in place.

The large beams were purchased new but the rest of the wood was second hand. I bought an entire truckload of used “betonplex” which is an extremely tough and water resistant coated plywood. It’s a very expensive material and I scored it cheaply but… it was covered in concrete molding residue and had thousands of (bend and broken) screws to be removed. It took a friend and I a couple weeks to clean these boards but to this day almost all of the flooring and shelving in the shop is from this purchase.

A few bikes are visible: Gustav Transport trike on the right and on the left a handful of Monarks including a Long John. Except for those big beams, the Gustav transported practically everything needed to build this shop. Sometimes it was loaded with 250+ kg of materials. That bike remained in rental service until 2008 when Melissa Halley purchased it. I’ll tell that story in a following post.

June 2004, WorkCycles Veemarkt shop is open for business. It wasn’t busy yet and here artist friends Sietske Tjallingii and Eric Staller are using it as HQ for a film shoot nearby. I was happy to participate, especially considering the attractive women involved. Kyoko and I didn’t meet until a couple years later.

June 2004, Gustav Transport cargo trike in service as a rolling film platform… for the Conference Bike. That’s me pedaling. They filmed this movie about the CoBi.

Above a couple more recent pics of the WorkCycles Veemarkt shop from Marc of Amsterdamize fame.